Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt
Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt

Qubino Flush 2 Relays (Gen 5)

Qubino Flush 2 Relays

Qubino Flush 2 Relays (Gen 5)

With the Qubino Flush Double Relay, existing electrical installations (e.g. lighting, airing systems) can be integrated into a Z-Wave network.

439,20 kr exkl. moms

Artikelnummer T130-150012 Kategori

I lager (kan restnoteras)

With the Qubino Flush Double Relay, existing electrical installations (e.g. lighting, airing systems) can be integrated into a Z-Wave network. Thus, the connected device can still be controlled with the existing wall switch, but thanks to Z-Wave also via remote control, smartphone or sensor-controlled automation.The currently thinnest Z-Wave radio module is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the loads but acts as input device for the Qubino insert that is controlling the loads. The switch only sends control signal to the insert which controls both loads then again. The Qubino Flush Double Relay works with all switch design. You can use a momentary or a toggle switch. Its recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

Teknisk data

Power supply: 110 – 230 VAC ±10%, 50/60Hz, 24-30VDC
Rated load current of AC output (resistive load)*:2 X 4A / 230VAC
Rated load current of DC output (resistive load): 2 X 4A / 30VDC
Output circuit power of AC output (resistive load): 2 X 920W (230VAC)
Output circuit power of DC output (resistive load): 2 X 96W (24VDC)

Digital temperature sensor range (sensor sold separately) -50 ~ +125°C
Operation temperature: -10 ~ +40°C
Distance: up to 30 m indoors (depending on building materials)
Dimensions (WxHxD): 41,8×36,8×16,9mm
Weight: 28g

Electricity consumption 0,4W
Power measurement accuracy: P=0-200W, +/-2WP>200W, +/-3%

For installation in boxes: Ø ≥ 60mm or 2M
Switching: Relay (2x)
*In case of load other than resistive, pay attention to the value of cos φ and if necessary apply load lower than the rated load. Max current for cos φ=0,4 is 2A at 250VAC, 3A at 24VDC

[wpsc_create_ticket]
1
    1
    Din varukorg
    Platshållare Remove
    Fibaro Double Switch 2 FGS-223
    1 X 455,20 kr = 455,20 kr

    Behöver ni hjälp?

    Kontakta oss

    Prenumerera på vårt nyhetsbrev

    Vi skickar ut nyhetsbrev om produkter och teknik. Vi spammar inte er brevlåda med erbjudanden varje vecka. Vårt fokus är att tillhandahålla teknik som löser era behov, inte att tävla om vem som säljer mest och billigast.