Wireless Sensor Voltage Detector detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 200 Volts.
Prisförfrågan kontakta oss
ALTA wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor. This sensor is capable of measuring voltage up to 200 VDC by connecting the leads on the sensor to the positive and ground terminals of the device being measured.
| ALTA Commercial Coin Cell Wireless DC Voltage Detection Sensor | |
|---|---|
| Supply voltage | 2.0–3.8 VDC * |
| Current consumption | 0.2 µA (sleep mode), 0.7 µA (RTC sleep), 570 µA (MCU idle), |
| 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode) | |
| Operating temperature range (board circuitry and coin cell) | -7°C to +60°C (20°F to +140°F) ** |
| Optimal battery temperature range (coin cell) | +10°C to +200°C (+50°F to +392°F) |
| Maximum rated input voltage | 200.0 Volts*** |
| Minimum rated input voltage | -200.0 Volts *** |
| Voltage detection threshold | Present above ~2.3 VDC, Absent below ~1.8 VDC (Indeterminant from 1.8 to 2.3 VDC) **** |
| Trigger | Transmits data upon state change |
| Open circuit reading | Voltage absent |
| Input Impedance | 2 MOhm |
| Response Time | ~2 Seconds |
| Leaded wire specification | 2 Wires, 1 ft (12 in), Red (+), Black (-), 22 AWG (Custom lengths available upon request) |
| Integrated memory | Up to 3200 sensor messages |
| Wireless range | 1,200+ ft non-line-of-sight |
| Security | Encrypt-RF® (256-bit key exchange and AES-128 CTR) |
| Weight | 20 g |
| Certifications | 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz product tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 609200 |
| Dokument | Datablad |
Vi skickar ut nyhetsbrev om produkter och teknik. Vi spammar inte er brevlåda med erbjudanden varje vecka. Vårt fokus är att tillhandahålla teknik som löser era behov, inte att tävla om vem som säljer mest och billigast.