”Monnit Wireless Activity Timer (Industrial)” har lagts i din varukorg. Visa varukorg
ALTA Wireless Pulse Counters (Single Input) – Coin Cell Powered
ALTA Wireless Pulse Counters (Single Input) – Coin Cell Powered
Wireless Sensor pulse counters can be integrated with a dry contact or mechanical switch to count number of actuations occurring within a given time frame.
ALTA wireless pulse counters can be integrated with up to four, dry contact or mechanical switch and closure devices to count the number of actuations occurring within a given time frame for each input.
2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA
(radio TX mode)
Operating temperature range (board circuitry and coin cell)
-7°C to +60°C (20°F to +140°F) **
Optimal battery temperature range (coin cell)
+10°C to +50°C (+50°F to +122°F)
Maximum count
4294967296 (32 bit number)
Input voltage
0 to 15 Volts DC
Detection wires
High impedance (2-wire), 3 ft length
Counter operation
Positive and/or negative edge pulses
Compatibility
Open collector NPN switches (passive)
Mechanical switches (passive)
0–15V driven source (active)***
Max input pulse rate/min pulse width with passive input ****
Max Pulse Rate
Min Pulse Width*****
No Filter
~ 2 KHz
~ 0.5 ms
4 Hz Filter
~ 4 Hz
~ 250 ms
40 Hz Filter
~ 40 Hz
~ 25 ms
Datalogging
Datalogs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle):
– 10-minute heartbeats = ~ 22 days
– 2-hour heartbeats = ~ 266 days
Wireless range
1,200+ ft non-line-of-sight
Security
Encrypt-RF® (256-bit key exchange and AES-128 CTR)
Weight
20 g
Certifications
900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz product tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950
Vi skickar ut nyhetsbrev om produkter och teknik. Vi spammar inte er brevlåda med erbjudanden varje vecka. Vårt fokus är att tillhandahålla teknik som löser era behov, inte att tävla om vem som säljer mest och billigast.