Wireless Sensor dry contact detects contact between two wired points. Used in tracking production lines & monitoring freezer/cooler door status.
Prisförfrågan kontakta oss
ALTA wireless dry contact sensors can be used to detect contact between two wired contact points. This sensor can be used with an external mechanical switch or a contact plate to alert the user via SMS text and/or email when the contacts touch or a switch is triggered.
| ALTA Industrial Wireless Dry Contact Sensor | ||
|---|---|---|
| Supply voltage | 2.0–3.8 VDC (3.0–3.8 VDC using power supply) * | |
| Current consumption | 0.2 µA (sleep mode), 0.7 µA (RTC sleep), 570 µA (MCU idle), | |
| 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode) | ||
| Operating temperature range (board circuitry and battery) | -40°C to +85°C (-40°F to +185°F) ** | |
| Included battery | Max temperature range | -40° to +85°C (-40° to +185°F) |
| Capacity | 1500 mAh | |
| Optional solar feature | Solar panel | 5VDC/30mA (53mm x 30mm) |
| Charging temperature range | 0° to 45°C (32° to 113°F) | |
| Max temperature range | -20° to 60°C (-4° to 140°F) | |
| Included rechargeable battery | 600 mAh/>2000 charge cycles (80% of initial capacity) | |
| Solar efficiency | Optimized for high and low-light operation *** | |
| Charging effieciency | 40% *** | |
| Luminous sustainability | Minimum of 250 LUX *** | |
| Lead wire length | 1 ft (12 in) | |
| Detection wires | High impedance | |
| Datalogging | Datalogs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle): – 10-minute heartbeats = ~ 22 days – 2-hour heartbeats = ~ 266 days |
|
| Wireless range | 1,200+ ft non-line-of-sight | |
| Security | Encrypt-RF® (256-bit key exchange and AES-128 CTR) | |
| Weight | 133 g | |
| Enclosure rating | NEMA 1, 2, 4, 4x, 12 and 13 rated, sealed and weather proof | |
| UL rating | UL Listed to UL508-4x specifications (File E194432) | |
| Certifications | 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz product tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950 | |
| Dokument | Datablad |
Vi skickar ut nyhetsbrev om produkter och teknik. Vi spammar inte er brevlåda med erbjudanden varje vecka. Vårt fokus är att tillhandahålla teknik som löser era behov, inte att tävla om vem som säljer mest och billigast.