Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt
Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt
ALTA Industrial Wireless AC Current Meter - 500 Amp

ALTA Industrial Wireless AC Current Meter – 500 Amp with Solar Power

Wireless Sensor AC Current Meters measure the RMS current of an alternating current system using a current transformer that wraps around the wire.

Prisförfrågan kontakta oss

Artikelnummer MNS2-8-IN-CM-500-SOL Kategori
Varumärke:Monnit

Monnit wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the ”hot” wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the iMonnit system. The iMonnit system is capable of generating watt hour or kilowatt hour readings as well.

Teknisk data

ALTA Industrial Wireless AC 500 Amp Current Meter
Supply   voltage 2.0–3.8 VDC (3.0–3.8 VDC using power supply) *
Current   consumption 0.2 µA (sleep mode), 0.7 µA (RTC sleep), 570 µA (MCU idle),
2.5 mA (MCU   active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode)
Operating   temperature range (board circuitry and battery) -40°C to +85°C (-40°F to +185°F) **
Included battery Max temperature range -40° to +85°C (-40° to +185°F)
Capacity 1500 mAh
Optional solar feature Solar panel 5VDC/30mA (53mm x 30mm)
Charging temperature range 0° to 45°C (32° to 113°F)
Max temperature range -20° to 60°C (-4° to 140°F)
Included rechargeable battery 600 mAh/>2000 charge cycles (80% of initial capacity)
Solar efficiency Optimized for high and low-light operation ***
Integrated   memory Up to 3200 sensor messages
Wireless   range 1,200+ ft non-line-of-sight
Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)
Weight 4.7 ounces
Enclosure   rating NEMA 1, 2, 4, 4x, 12 and 13 rated, sealed and weather proof
UL   rating UL Listed to UL508-4x specifications (File E194432)
Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz   product tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN   300 220-2 V3.1.1 (2017-02)and EN 60950
0-500 Amp CT   Specifications
Absolute   max CT current 600 Amps RMS (A rms)
Maximum   accurate CT current 500 A rms
Frequency   range 50–100 Hz
Accuracy +/- (2% + 1.4 A rms) **
Calibrated   accuracy with appropriate offset +/- (1% + .7 A rms) **
Offset   Compensation Limits -327.68 to + 327.68 A rms (default set to + 1.45 A rms) ***
Measurement   resolution ~0.3A rms
Typical   Deadband ~1.45 A rms ***
Current   transducer dimensions 93 mm x 68 mm x 52 mm (36 mm inner diameter)
Weight 413 g (CT only)
Lead   Length 3 feet

Ladda ner

Dokument Datablad
Manual
0
    0
    Din varukorg
    Your cart is empty

    Prenumerera på vårt nyhetsbrev

    Vi skickar ut nyhetsbrev om produkter och teknik. Vi spammar inte er brevlåda med erbjudanden varje vecka. Vårt fokus är att tillhandahålla teknik som löser era behov, inte att tävla om vem som säljer mest och billigast.