With the Qubino Mini Dimmer, existing lighting installations can be integrated into a Z-Wave network. Thus, the connected lights can still be switched and dimmed with the existing wall switch, but – thanks to Z-Wave – also via remote control, smartphone or sensor-controlled automation.
The currently smallest Z-Wave radio module is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the Qubino insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The Qubino Mini Dimmer works with all switch designs. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.
If you would like to know more about smart dimmers, you’re more than welcome to take a look at Qubinos newest blog articles. In the first part of the article, they’ll guide you through everything you need to know about dimming. Turning your lights smart and being able to control them with a simple tap on your smartphone, would be the next step. Qubino also tested more than 35 bulbs – dimmable and non-dimmable, from different manufacturers as Ikea, Osram, Philips, Verbatim and others with Qubino Mini Dimmer. Click here for results.