Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt
Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt

ALTA Wireless Voltage Detection – 200 VDC – AA Battery Powered

ALTA Wireless Voltage Detection - 200 VDC - AA Battery Powered

ALTA Wireless Voltage Detection – 200 VDC – AA Battery Powered

Wireless Sensor Voltage Detector detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 200 Volts.

Prisförfrågan kontakta oss

Artikelnummer MNS2-8-W2-VD-200 Kategori
Varumärke:Monnit

ALTA wireless voltage meters (commercial AA battery powered) are capable of measuring the voltage off another device, battery, or sensor. This sensor is capable of measuring voltage up to 200 VDC by connecting the leads on the sensor to the positive and ground terminals of the device being measured.

Teknisk data

ALTA Commercial AA Wireless DC Voltage Detection Sensor
Supply voltage 2.0–3.8 VDC (3.0–3.8 VDC using power supply) *
Current consumption 0.2 µA (sleep mode), 0.7 µA (RTC sleep), 570 µA (MCU idle),
2.5 mA (MCU   active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode)
Operating temperature range (board circuitry and batteries) -18°C to 55°C (0°F to 130°F) using alkaline
-40°C to 85°C (-40°F to 185°F)   using lithium **
Optimal battery temperature range   (AA) +10°C to +200°C (+50°F to +392°F)
Maximum rated input voltage 200.0 Volts***
Minimum rated input voltage -200.0 Volts ***
Voltage Detection Threshold Present above ~2.3 VDC, Absent below ~1.8 VDC   (Indeterminant from 1.8 to 2.3 VDC) ****
Trigger Transmits data upon state change
Open circuit reading Voltage absent
Input Impedance 2 MOhm
Response Time ~2 Seconds
Leaded wire specification 2 Wires, 1 ft (12 in), Red (+), Black (-), 22   AWG (Custom lengths available upon request)
Integrated memory Up to 3200 sensor messages
Wireless range 1,200+ ft non-line-of-sight
Security Encrypt-RF® (256-bit key   exchange and AES-128 CTR)
Weight 105 g
Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz   product tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN   300 220-2 V3.1.1 (2017-02) and EN 609200

Ladda ner

Dokument Datablad
[wpsc_create_ticket]
0
    0
    Din varukorg
    Your cart is empty

    Behöver ni hjälp?

    Kontakta oss

    Prenumerera på vårt nyhetsbrev

    Vi skickar ut nyhetsbrev om produkter och teknik. Vi spammar inte er brevlåda med erbjudanden varje vecka. Vårt fokus är att tillhandahålla teknik som löser era behov, inte att tävla om vem som säljer mest och billigast.