Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt
Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt

ALTA Digital Temperature Sensor with 10 foot Probe – AA Battery Powered

digital-temperature-sensor

ALTA Digital Temperature Sensor with 10 foot Probe – AA Battery Powered

The ALTA Digital Temperature Sensor assesses the temperature of whatever environment the probe is in. At the push of a button, temperature readings are displayed on the device’s digital display.

Prisförfrågan kontakta oss

Artikelnummer MNS2-8-W2-TS-SD-L10 Kategori
Varumärke:Monnit
The ALTA Digital Temperature Sensor assesses the temperature of whatever environment the probe is in. At the push of a button, temperature readings are displayed on the device’s digital display and sent to the portalsoftware through a gateway(purchased separately), creating an easy-to-read log of current and past readings.

Teknisk data

ALTA Digital Temperature Sensor
Supply voltage 2.0–3.8 VDC (AA alkaline or lithium batteries)
Current  consumption 0.2 µA (sleep mode), 0.7 µA (RTC   sleep), 570 µA (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6   mA (radio TX mode)
Operating   temperature range (board circuitry and battery) -18°C to 55°C(0°F to 130°F ) using alkaline, -40°C to +85°C (-40°F to +185°F) using lithium
Optimal Battery Temperature
Range (AA)
+10°C to +50°C (+50°F to +122°F)
Integrated memory Up to 3200 sensor messages
Wireless range720 + ft non-line-of-sight
Security Encrypt-RF® (256-bit key exchange   and AES-128 CTR)
Weight 87 g
Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and   IC: 9794A-G2SC1.868 and 433 MHz product tested and found to comply with:   EN300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950
Sensor Specification
Temperature Measurement Specifications Range: -40°C to +125°C (-40°F to +257°F)
Accuracy: +/- 1° C (1.8° F)
User-calibrated accuracy: ± 0.25° C (+/- 0.45° F)
Resolution: 0.1° C (0.1° F)
Response time: 15 sec max*
Units: C or F (User configurable on sensor and in portal)
Lead Specifications Probe Material: 304 stainless steel.
Probe Dimensions: 5 mm dia. x 35 mm
Lead Length: 3 ft or 10 ft (Contact distributorfor custom length options)
Thermistor based temperature element
Shielded cable and probe
Display Specifications Operating temperature range: -10°C to 60°C (14°F to 140°F)
Storage temperature range: -20°C to 70°C (-4°F to 158°F)
Symbols: 4 digits, 3 decimals, C/F, Low Battery, Signal Strength, Minus symbol
Viewing Area: 14.0 mm x 26.0 mm
Digit Size: 8.5 mm x 4.5 mm
Current consumption: ~260 uA
Sensor Data Temperature: xxx.x C or F, Signed Integer (Raw temperature data is in Celsius)
Mode: 0 or 1, 0 = Read button not pressed, 1 = Read button pressed, Unsigned Byte

*Response time will be less than 15 seconds after probe tip reaches desired temperature. The probe tip temperature will change at different rates
based on measurement medium. Ex: In still air probe tip may take minutes to reach desired temperature, in liquid bath probe tip may take only a
few seconds to reach the desired temperature.

[wpsc_create_ticket]
0
    0
    Din varukorg
    Your cart is empty

    Behöver ni hjälp?

    Kontakta oss

    Prenumerera på vårt nyhetsbrev

    Vi skickar ut nyhetsbrev om produkter och teknik. Vi spammar inte er brevlåda med erbjudanden varje vecka. Vårt fokus är att tillhandahålla teknik som löser era behov, inte att tävla om vem som säljer mest och billigast.