With the AEOTEC Nano Dimmer switchable and dimmable electric installations such as lighting or ceiling fans can be integrated into a Z-Wave network. Thus, the connected load can be switched and dimmed both wirelessly via Z-Wave and locally via existing wall switch. The AEOTEC Nano Dimmer adjusts oneself to the connected lighting automatically and is therewith useable with various lighting kind of lighting (LED, Dimmable LED, CFL, Fluorescent, Incandescent, Halogen). Combined with an appropriate Bypass, it can even dim low power LEDs and CFLs that use less than 20 watts. The compact radio module (60% smaller than its predecessor Micro Dimmer) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. Its recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.
Name: Nano Dimmer
Model number: ZW111
Power input: 120 to 240VAC, 50/60Hz.
Rated Current Output: 1.2A maximum
Rated Power Output: 144W maximum.
Repeater: Yes
Beaming: Yes
Minimum Power (Watt):
2-wire (no neutral)
Resistance load Only: min 20W.
3-wire (with neutral)
Capacitive load: min 11W.
Inductive load: no min / max 100W
Resistance load: min 10W.
Rated output: Max 1.2A.
Max standby power: <0.8W.
Power measurement accuracy: + or – 3W.
Dimensions: 42.5 x 40 x 20 mm (1.7 x 1.6 x 0.8 in)
Operating temperature:
0℃ to 40℃
32℉ to 104℉.
Relative humidity: 8% to 80%.
Operating distance:
Up to 492 feet outdoors.
Up to 150 metres outdoors.
Supported Loads;
|
Control ability
|
Supported load types
|
|
With dimming function (On/Off/Dim control)
|
Incandescent bulbs,
Halogen bulbs with or without electronic transformer,
Dimmable LED bulbs (leading edge and trailing edge),
Dimmable Fluorescent lamps.
|
|
Without dimming function (On/Off control only)
|
Non-dimmable bulbs,
Compact fluorescent lamps with electronic rectifier,
Fluorescent tube lamps with electronic ballast,
LED Bulbs
|
- Inductive Loads under 100W (only while Nano Dimmer connected as a 3-wire device)
