Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt
Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt

Aeotec Nano Dimmer

With the AEOTEC Nano Dimmer switchable and dimmable electric installations such as lighting or ceiling fans can be integrated into a Z-Wave network.

519,20 kr exkl. moms

Artikelnummer T104-171901 Kategori

I lager (kan restnoteras)

With the AEOTEC Nano Dimmer switchable and dimmable electric installations such as lighting or ceiling fans can be integrated into a Z-Wave network. Thus, the connected load can be switched and dimmed both wirelessly via Z-Wave and locally via existing wall switch. The AEOTEC Nano Dimmer adjusts oneself to the connected lighting automatically and is therewith useable with various lighting kind of lighting (LED, Dimmable LED, CFL, Fluorescent, Incandescent, Halogen). Combined with an appropriate Bypass, it can even dim low power LEDs and CFLs that use less than 20 watts. The compact radio module (60% smaller than its predecessor Micro Dimmer) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

Teknisk data

Name: Nano Dimmer

Model number: ZW111

Power input: 120 to 240VAC, 50/60Hz.

Rated Current Output: 1.2A maximum

Rated Power Output: 144W maximum.

Repeater: Yes

Beaming: Yes

Minimum Power (Watt):

2-wire (no neutral)

Resistance load Only: min 20W.

3-wire (with neutral)

Capacitive load: min 11W.

Inductive load: no min / max 100W

Resistance load: min 10W.

Rated output: Max 1.2A.

Max standby power: <0.8W. 

Power measurement accuracy: + or – 3W.

Dimensions: 42.5 x 40 x 20 mm (1.7 x 1.6 x 0.8 in)

Operating temperature: 

0℃ to 40℃ 

32 to 104.

Relative humidity: 8% to 80%.

Operating distance: 

Up to 492 feet outdoors.

Up to 150 metres outdoors.

Supported Loads;

Control ability
Supported load types
With dimming function (On/Off/Dim control)
Incandescent bulbs,
Halogen bulbs with or without electronic transformer,
Dimmable LED bulbs (leading edge and trailing edge),
Dimmable Fluorescent lamps.
Without dimming function (On/Off control only)
Non-dimmable bulbs,
Compact fluorescent lamps with electronic rectifier,
Fluorescent tube lamps with electronic ballast,
LED Bulbs
  • Inductive Loads under 100W (only while Nano Dimmer connected as a 3-wire device)

0
    0
    Din varukorg
    Your cart is empty

    Behöver ni hjälp?

    Kontakta oss

    Prenumerera på vårt nyhetsbrev

    Vi skickar ut nyhetsbrev om produkter och teknik. Vi spammar inte er brevlåda med erbjudanden varje vecka. Vårt fokus är att tillhandahålla teknik som löser era behov, inte att tävla om vem som säljer mest och billigast.