This Z-Wave module is used to regulate temperature. Regulation is done using full wave PWM technology. The module can be controlled either through Z-Wave network or through the wall switch.
The module is desgined to be mounted inside a "flush mounting box" and is behind a traditional switch. This module measures power consumption of connected device. It is also designed to act as repeater in order to improve range and stability of the Z-Wave network.
No batteries required as it is connected directly to either 230VAC or 24VDC.
The module supports mono-stable switches (push button) and bi-stable switches. The module is factore set to operate with bi-stable switches.
1 Flush PWM thermostat(ZMNHLA2). 1 temperature sensor
Power supply: 110-230 VAC, 50/60Hz, 24-30VDC
Rated load current of AC output: 0,85A/230VAC
Rated load current of DC output: 0,85A/24VDC
Power metering accuracy: +-2W
Operation temperature: -10 up to 40 degrees
Range. Up to 30 meters indoors (depending on building materials)
Dimensions: 41,8 x 36,8 x 15,4 mm
Electricity consupmtion: 0,7W
Digital temperature sensor range: -50 up to 125 degrees, resolution 0,1 degree
Digital temperature sensor cable length: 1000mm